微信图片_20251124151922_32_206
sale@aoruntruck.com
+86 1836615 9698

‹

HOWO TX 6x4 Dump Trucks

›

‹

  • HOWO TX 6x4 Dump Trucks
  • HOWO TX 6x4 Dump Trucks
  • HOWO TX 6x4 Dump Trucks
  • HOWO TX 6x4 Dump Trucks
  • HOWO TX 6x4 Dump Trucks
  • HOWO TX 6x4 Dump Trucks

›

HOWO TX 6x4 Dump Trucks

The HOWO TX 6x4 Dump Truck is the definitive heavy-duty tipper solution for demanding construction, mining, and infrastructure projects in challenging environments like Africa and Southeast Asia. Built on Sinotruk’s decades of heavy-duty truck experience and integrating MAN technology, the HOWO TX 6x4 delivers the perfect balance of massive payload capacity, exceptional fuel efficiency, and unparalleled uptime. Every unit exported by AORUN VEHICLE undergoes a strict 128-point reconditioning process to ensure factory-level quality for our global partners.
Tel：+86 1836615 9698
Email：sale@aoruntruck.com
WhatsApp：+86 1836615 9698
Leave Message
Application scenarios

Where Reconditioned HOWO TX 6x4 Dump Trucks Are Deployed

  1. West Africa Construction & Mining (Cost-Sensitive Fleet Build) Validated for Côte d'Ivoire (August 2026) and Nigeria (September 2026). Contractors building fleets of 5–20 units who need MAN-technology cabin quality and HC16 axle reliability without paying new-vehicle prices. The 128-point reconditioning process restores each unit to factory-level performance — engine overhaul, transmission inspection, new tires, cabin refurbishment — at roughly 50–65% of new vehicle cost.

  2. Nigeria Quarry & Earthwork (SONCAP-Certified Supply Chain) Specifically validated for Nigeria market (September 2026 factory audit by Nigerian delegation). Key Nigeria-specific features: SONCAP certification and Form M documentation coordinated from our trade hubs; RoRo shipping direct to Apapa Port or Tin Can Island Port, Lagos; 8+8mm cold-riveted frame absorbing excavator bucket drop loads on Apapa–Lekki corridor earthwork sites.

  3. Ghana Gold Mining Corridor (Tema / Takoradi Port) Validated for Ghana mining operations (August 2026 delegation factory visit). Configuration: genuine HYVA front-lifting hydraulic cylinder for fast tipping cycles on soft mining soils; U-shape manganese steel cargo box for raw gold ore and wet clay without floor warping; 100% shot-blasting + zinc-rich epoxy anti-rust priming for Tema/Takoradi coastal salt-air environment.

  4. Francophone West Africa (Abidjan / Ivory Coast & Regional) Validated for Côte d'Ivoire (August 2026 deal closing in Guangzhou). RoRo shipping to Abidjan Port, ocean transit approximately 30–40 days. MAN-technology cabin with 4-point air suspension and tropical air-conditioning — specifically highlighted by Ivory Coast clients for driver retention on high-humidity coastal routes from Abidjan to San Pédro and inland unpaved tracks.

Product Specifications
  • howo tx dump truck enggie
  • howo tx dump truck sale
FeatureSpecification Details
Model SeriesHOWO TX (High-end Engineering Series)
Drive Wheel6x4 (Double Rear Axle Drive)
Horsepower380HP / 400HP
Engine BrandWeichai (Heavy-duty Diesel)
TransmissionSINOTRUK 10-Speed Manual (HW Series)
Payload Capacity21 - 30 Tons
Cargo Box Size5600 × 2300 × 1500 mm
Emission StandardEuro 2 (High Fuel Compatibility)
Maximum Torque1000 - 1500 Nm
Core features
  • new tx dump truck
  • howo tx dump truck box
  • howo tx dump truck sale
  • howo tx dump truck heavy

  • The 128-Point Reconditioning Process — What It Actually Means

    Every HOWO TX 6x4 unit exported by Aorun undergoes a structured reconditioning process before shipment. This is not a "clean and paint" operation. Key stages:

    Engine Overhaul Complete disassembly, inspection, and replacement of all wear components: piston rings, cylinder liners (if worn beyond tolerance), fuel injectors, oil seals, gaskets. Engine cold-start and load test before reassembly sign-off.

    Transmission Inspection Full gearbox disassembly, bearing and synchronizer inspection, replacement of any worn components. Gear shift quality test under simulated load.

    Axle & Brakes HC16 rear axle bearing replacement and differential inspection. Full brake system inspection: drums, pads, air lines, slack adjusters. Brake performance test to legal standard.

    Hydraulic System Hydraulic cylinder seal replacement (HYVA or equivalent). Pump pressure test. Full tip cycle (raise, hold, lower) under loaded conditions — stability verified.

    Chassis & Frame 8+8mm frame inspection for fatigue cracks. Anti-corrosion treatment: shot-blasting, zinc-rich epoxy primer, protective topcoat. Underseal on all exposed chassis members.

    Cabin New cab upholstery, door seals, glass inspection. Air-conditioning system service and recharge. Electrical system check: lights, instruments, horn, wiper.

    Tyres & Wheels New or near-new tyres on all positions. Wheel alignment and balancing. Spare tyre fitted and secured.

    Final Road Test Minimum 50km road test under simulated payload conditions. Full stop-and-go braking test. Hydraulic tip cycle repeated 3x on-road.

    Result: factory-level performance at 50–65% of new vehicle cost.

Product Showcase

Message
Submit
Product Recommendations
FAQ

How do you guarantee the quality and reliability of your vehicles to adapt to our local market environment and harsh operating conditions?

We ensure the global adaptability of our products through a triple system:

Source Quality Control: Our factory is equipped with advanced testing equipment and implements full-process quality management. Core components are sourced from well-known domestic and international brands, ensuring fundamental reliability from the source.

Localized Verification and Customization: With over ten years of experience serving the Asia, Africa, and Middle East markets, we have a deep understanding of the challenges posed by high temperatures, dusty environments, and complex road conditions. We can tailor and enhance the cooling system, chassis protection, and tire configuration to suit your specific local environment.

Rigorous Factory Testing: Every vehicle undergoes rigorous comprehensive performance testing and road testing before leaving the factory, ensuring it meets design standards and predetermined operating conditions before actual delivery.

In addition to standard models, can you provide customized modification solutions based on our specific transportation needs, climate, or road conditions?

Absolutely. Customization is one of our core strengths.

Our professional engineering team can provide in-depth modification solutions based on your specific business scenarios (such as mineral transportation, logistics distribution, engineering construction, etc.), local regulations, and special climates (such as extremely cold or tropical regions). This includes, but is not limited to: changing the chassis structural strength, adjusting the cargo box/tank material and capacity, upgrading the cooling/insulation system, adapting special tires or suspension, and adding safety equipment that complies with local regulations. Please provide your specific requirements, and we will provide you with a tailor-made solution and drawing confirmation.

In terms of price and overall cost-effectiveness, what are your core advantages compared to other suppliers?

Our core advantage lies in offering a superior Total Cost of Ownership (TCO), not just an initial purchase price. This is reflected in:

Direct Cost Advantage: As a manufacturer located in the Liangshan industrial cluster in Shandong, we integrate production and trade, boasting an efficient supply chain that allows us to offer highly competitive ex-factory prices.

Low Long-Term Operating Costs: We recommend mature and reliable configurations, focusing on vehicle durability and fuel economy, significantly reducing your long-term operating, maintenance, and fuel costs.

One-Stop Service Value: We are proficient in the entire export process, providing a comprehensive service including paperwork, logistics, and customs clearance, along with 24/7 after-sales support. This saves you significant time, effort, and hidden costs, achieving true peace of mind.

For international buyers, can you provide a one-stop solution and continuous support, from export customs clearance and logistics to after-sales maintenance and parts supply?

This is the cornerstone of our professionalism in serving global clients. We offer turnkey solutions covering the entire transaction lifecycle:

Trade and Logistics: Our professional trading team is well-versed in international trade rules and export procedures, and can handle all aspects of document preparation, customs clearance, ocean freight booking, and insurance, providing door-to-door logistics solutions.

After-sales and Parts Network: We have established a stable service network and parts inventory in major markets (Africa, the Middle East, Central Asia, and Southeast Asia), providing timely localized technical support and parts supply.

24/7 Support: We offer 24/7 multilingual customer service, so you can reach us immediately for any operational or technical issues, ensuring peace of mind after your purchase.